|
09:00 - 09:30
|
Opening of the symposium |
|
|
09:30 - 12:00
|
Durability and life assessment (Webinar Room A) |
(+)
|
|
09:30 - 10:00 |
› Case study of carbonation of 100 years old concrete covered by a thin cement render - Jakub Gašpárek, Slovak University of Technology, Faculty of Civil Engineering, Department of Concrete Structures and Bridges, Radlinského 11, 81005 Bratislava |
|
|
10:00 - 10:30 |
› Comparison of normative test methods for evaluating concrete resistance to freeze-thaw cycles to real exposure conditions. - Sara AL HAJ SLEIMAN, Research Institute of Civil and Mechanical Engineering GeM, UMR-CNRS 6183 – Ecole Centrale de Nantes, 1 Rue de la Noë, 44300 Nantes, France, Association Technique de l'Industrie des Liants Hydrauliques |
|
|
10:30 - 11:00 |
› Experimental study of the concrete creep potential that is already damaged by Alkali Aggregates Reactions (AAR) in a new finite elements approach - Clement LACOMBE, Laboratoire Matériaux et Durabilité des constructions |
|
|
11:00 - 11:30 |
› Internal hydrophobization of cement-based materials - Kalina Grabowska, Department of Building Materials Physics and Sustainable Design, Lodz University of Technology |
|
|
11:30 - 12:00 |
› Numerical Simulation of Asphalt Pavement Countermeasure at High Temperature Against Protrusion of Vertical PC Bars Using Applied Element Method - Addisu Desalegne Bonger, Yokohama National University |
|
|
09:30 - 12:00
|
Fatigue of concrete structures (Webinar Room B) |
(+)
|
|
09:30 - 10:00 |
› Cyclic Shear Response of Reinforced Concrete Dapped-End Beams (RCDEBs) Under Bond Deterioration - Ajibola Ibrahim Quadri, Graduate school of urban innovation, Yokohama National University |
|
|
10:00 - 10:30 |
› Damage indication by electrical resistivity measurement of carbon short fibre reinforced concrete in fatigue testing |
|
|
10:30 - 11:00 |
› Influence of silica fume on the deterioration under compressive fatigue loading in high-strength concrete - Tim Scheiden, Institute of Building Materials Science, Leibniz University Hannover |
|
|
11:00 - 11:30 |
› Influence of temperature increase on fatigue behaviour of concrete during compressive fatigue loading - Martin Markert, Materials Testing Institute University of Stuttgart |
|
|
11:30 - 12:00 |
› Influence of the concrete production and specimen preparation techniques on the compressive strength and fatigue resistance of HPC - Marco Basaldella, Institute for Building Materials Science, Gottfried Wilhelm Leibniz Universität Hannover |
|
|
12:00 - 14:00
|
Break |
|
|
14:00 - 16:30
|
Innovation in materials and structures (Webinar Room A) |
(+)
|
|
14:00 - 14:30 |
› Behaviour of glass fiber reinforced gypsum panels as walls and slabs : a review - AISHWARYA SHAJI, Indian Institute of Technology Madras |
|
|
14:30 - 15:00 |
› Identification of mechanical fracture parameters of fine-grained brittle matrix composites - Martin Lipowczan, Brno University of Technology, Faculty of Civil Engineering |
|
|
15:00 - 15:30 |
› Plastic hinge relocation on the beams with innovative beam-to-column joints - Haider Hamad Ghayeb, Department of Civil Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia |
|
|
15:30 - 16:00 |
› The influence of cyclic freezing – thawing on the effectiveness of anchoring FRP reinforcement - Rafal Wasilczyk, Białystok University of Technology |
|
|
16:00 - 16:30 |
› The experimental verification of concrete elements strengthened using UHPC - Lukáš Boháček, Czech Technical University in Prague |
|
|
14:00 - 16:30
|
Monitoring and structural assessment (Webinar Room B) |
(+)
|
|
14:00 - 14:30 |
› Assessment of Existing Masonry Structures (The ARES project) - Ivan Hafner, Faculty of Civil Engineering University of Zagreb |
|
|
14:30 - 15:00 |
› Stop Criteria for Proof Load Testing of Reinforced Concrete Structures - Gabriela I. Zarate Garnica, Concrete Structures, Delft University of Technology, Delft, the Netherlands |
|
|
15:00 - 15:30 |
› Wave-based Indicators of Shear Failure in Reinforced Concrete Members without Shear Reinforcement: A Review - Fengqiao Zhang, Delft University of Technology |
|
|
15:30 - 16:00 |
› Seismic assessment of a RC frame building designed for gravity loads including joint deformation capacity model - Marcello Sabene, University Niccolò Cusano |
|
