Programme

Wednesday, August 26, 2020

Time Event  
09:30 - 10:00 Opening of the symposium (Webinar Room A) - J.M. Torrenti, T-O. Olsen, G. Balazs  
10:00 - 12:00 Innovation in materials and structures (Webinar Room A) - Prof György L. Balázs, Prof Sofiane Amziane and Dr Sándor Solyom  
10:00 - 10:30 › Application of bonding concrete to reinforcement using adhesives in steel-concrete composite structures - Oleksandr Horb, POLTAVA NATIONAL TECHNICAL YURI KONDRATYUK UNIVERSITY  
10:30 - 11:00 › Development of new-generation, biodegradable board thermal insulation - Dániel Csanády, Budapest University of Technology and Economics  
11:00 - 11:30 › Effects of using polypropylene and steel fibres on Ultra High Performance Concrete subjected to elevated temperatures - Ahmed Seyam, Budapest University of Technology and Economics [Budapest], PhD student  
11:30 - 12:00 › Experimental and numerical investigation of bond behaviour of synthetic macro-fibre in concrete - Mantas Garnevičius, Vilnius Gediminas Technical University  
10:00 - 12:00 Structural analysis and design (Webinar Room B) - Prof Akio Kasuga, Dr. Briffaut Matthieu and Dr Motohiro Ohno  
10:00 - 10:30 › Masonry strengthening under the combined action of vertical and horizontal forces - Dmytro Usenko, Department of Reinforced Concrete and Masonry Structures and Strength of Materials, National University «Yuri Kondratyuk Poltava Polytechnic»  
10:30 - 11:00 › Model uncertainty quantification for column removal scenario calculations using the energy-based method - Luchuan DING, Department of Structural Engineering and Building Materials, Ghent University, Ghent  
11:00 - 11:30 › Characterization of the anisotropic tensile response of UHPFRC - Rui Valente, University of Porto, Faculty of Engineering, CONSTRUCT  
12:00 - 14:00 Lunch  
14:00 - 16:30 Innovation in materials and structures (Webinar Room A) - Prof. Harald S. Müller, Dr. Arnaud Perrot and Dr. Joao Pacheco  
14:00 - 14:30 › Experimental investigation of reinforcement strategies for concrete extrusion 3D printed beams - Lukas Gebhard, Institute of Structural Engineering [ETH Zürich]  
14:30 - 15:00 › Influence of constant hygric stress on the load-bearing behaviour of high-performance solid absorber made of high-strength fibre concrete - Martin Kiesche, Technische Universität Kaiserslautern - Prof. Dr.-Ing. Matthias Pahn, Technische Universität Kaiserslautern  
15:00 - 15:30 › Influence of matrix properties and embedded length on the pull-out behaviour of yarns in cement/calcareous filler matrices - Anne-Claire Slama, Laboratoire de mécanique et matériaux du génie civil  
15:30 - 16:00 › Load-deformation behaviour of concrete tension ties with weft-knitted textile reinforcement - Minu Lee, Institute of Structural Engineering [ETH Zürich]  
16:00 - 16:30 › Mechanical and mineralogical characteristics of mortars with crushed and river sand - Emmanuel Elat  
14:00 - 16:30 Structural analysis and design (Webinar Room B) - Prof. Tor Ole Olsen, Bruno Godart and Dr. Graham Webb  
14:00 - 14:30 › Dimensioning Approach of Partially Prestressed Concrete Beams: Optimization of Simply Supported Beams - Abdel Nour Nadim, Université Clermont Auvergne, Université Blaise Pascal, Institut Pascal  
14:30 - 15:00 › Effects of unidirectional tensile stresses on punching shear of RC slabs - Pablo Fernandez, Universidad Politecnica de Catalunya  
15:00 - 15:30 › Experimental and numerical studies of nodes of light steel-reinforced concrete structures - Oleksandr Drobotia, National University «Yuri Kondratyuk Poltava Polytechnic»  
15:30 - 16:00 › Experimental Study on Flexural Behavior of Concrete Girders Prestressed with Stainless Steel Strands - ANWER AL-KAIMAKCHI, FAMU-FSU College of Engineering - Michelle Rambo-Roddenberry, FAMU-FSU College of Engineering  

Thursday, August 27, 2020

Time Event  
09:00 - 10:00 Sustainability and life cycle assessment (Webinar Room A) - Sandrine Mansoutre  
09:05 - 10:00 Keynote: Concrete in a carbon-neutral economy: an existential challenge! (Webinar Room A) - Bernard Mathieu  
10:00 - 10:30 Coffee break  
10:30 - 12:00 Innovation in materials and structures (Webinar Room A) - Prof. Frank Dehn, Prof. Ahmed Loukili and Dr Nikola Tosic  
10:30 - 11:00 › Numerical study on the micro-mechanical behaviour of artificial granular materials - Mohamed Amine Benmebarek, Széchenyi István University  
11:00 - 11:30 › Residual stiffness analysis of flexural concrete elements with composite reinforcement systems - Haji Akbar Sultani, Vilnius Gediminas Technical University  
11:30 - 12:00 › The Applicability of Superabsorbent Polymer as a Protective Carrier in the Bio-based Self-healing Concrete - Hana Schreiberova, České Vysoké Učení Technické  
10:30 - 12:00 Structural analysis and design (Webinar Room B) - Prof. Fabrice Gatuingt and Dr. Andreas Sjaastad  
10:30 - 11:00 › General method of structural analysis of reinforced concrete columns under axial load an biaxial bending - Bogdan Barylyak, Department of Reinforced Concrete and Masonry Structures and Strength of Materials, National University «Yuri Kondratyuk Poltava Polytechnic»  
11:00 - 11:30 › Impact of Modulus of Elasticity on Deflections of Concrete Structures - Radek Vasatko, Czech Technical University in Prague  
12:00 - 14:00 Lunch  
14:00 - 16:30 Innovation in materials and structures (Webinar Room A) - Prof. Petr Hajek, Prof. Olivier Plé and Dr. Vladyslav Shekhotsov  
14:00 - 14:30 › Wood Ashes from Electrostatic Filter as a Replacement for the Fly Ashes in Concrete - Piotr-Robert Lazik, University of Stuttgart  
14:30 - 15:00 › Sealing of service penetrations in timber buildings with the method wood in wood - Thomas Scherer, Technical University of Kaiserslautern  
15:00 - 15:30 › Drying shrinkage and mechanical properties of concrete based on Corbicula shells, from river sediments, as coarse aggregates - Hamza Beddaa, Project-team DIMA, 120 rue de Paris, BP 216 Sourdun, 77487 Provins Cedex  
15:30 - 16:00 › Influence of the sizes and the loading platform form on the strength of concrete elements at local compression - Iryna Kuznietsova, National University «Yuri Kondratyuk Poltava Polytechnic»  
14:00 - 16:30 Structural analysis and design (Webinar Room B) - Prof. Aurelio Muttoni, Dr François Toutlemonde and Dr. Marta del Zoppo  
14:00 - 14:30 › Numerical Plastic Analysis of Non-Prismatic Reinforced Concrete Beams Strengthened by Carbon Fiber Reinforced Polymers - Sarah Khaleel Ibrahim, Széchenyi István University  
14:30 - 15:00 › Punching shear at edge flat slab-column connections - Deema Abu-Salma, Imperial College London  
15:00 - 15:30 › Simplification of the procedure for determining the fire resistance of heat insulating brickwork - Heiner Kruse, Technische Universität Kaiserslautern  
15:30 - 16:00 › The change of stress-strain state in biaxial bended reinforced concrete Т-section beams depending on the load - Yuliia Prykhodko, Department of Reinforced Concrete and Masonry Structures and Strength of Materials, National University «Yuri Kondratyuk Poltava Polytechnic»  
16:00 - 16:30 › Bond behavior between high-strength concrete and steel reinforcement under high cycle fatigue push-in loading - Homam Spartali, RWTH Aachen University - Institute of Structural Concrete  

Friday, August 28, 2020

Time Event  
09:30 - 12:00 Durability and life assessment (Webinar Room A) - Prof. Hugo Corres, Prof. Karim Aït-Mokhtar and Dr. Motohiro Ohno  
09:30 - 10:00 › Accelerated carbonation of recycled concrete aggregates - Marie SERENG, Formulation, Microstructure, Modélisation et Durabilité des Matériaux de Construction  
10:00 - 10:30 › Leaching of concrete : a comparison of performance indicators - Aliénor Gauthier - Pouyanne, Institut de Recherche en Génie Civil et Mécanique  
10:30 - 11:00 › Experimental study of the concrete creep potential that is already damaged by Alkali Aggregates Reactions (AAR) in a new finite elements approach - Clement LACOMBE, Laboratoire Matériaux et Durabilité des constructions  
11:00 - 11:30 › Fracture mechanics parameters in assessment of high strength concrete's frost degradation - Sylwia Borowska, Białystok University of Technology  
09:30 - 12:00 Monitoring and structural assessment (Webinar Room B) - Prof. Joost Walraven, Dr Jean Luc Clément and Dr. Vladyslav Shekhotsov  
09:30 - 10:00 › Validation of a numerical model for singly reinforced corroded concrete beams - Hussein Nasser, Catholic University of Leuven - Katholieke Universiteit Leuven  
10:00 - 10:30 › A new assessment methodology for fair-faced concrete surfaces based on digital image processing - Kitti Ajtayné Károlyfi, Széchenyi István University  
10:30 - 11:00 › Carbon-fibred mortar: Effect of sand content and grain size distribution on electrical properties - Hamza Allam, Aix-Marseille Université, CNRS, IUSTI UMR 7343, 13453, Marseille  
11:00 - 11:30 › Transmission length test for prestressing cable after loss of mechanical anchorage - Rafał Walczak, Cracow University of Technology  
12:00 - 14:00 Lunch  
14:00 - 15:00 Durability and life assessment (Webinar Room A) - Prof. Marco di Prisco, Prof. Farid Benboudjema and Dr Marta del Zoppo  
14:00 - 14:30 › Numerical Modelling for Reactive Transport due to the Water-dependent Activities within Building Materials - Qingxiang XIONG, Institut National des Sciences Appliquées - Rennes  
14:30 - 15:00 › Numerical investigations on the influence of concrete cover on bond behavior of reinforcement in concrete after fire - Arunita Das, Institute for Construction Materials, University of Stuttgart  
15:00 - 16:00 Closing ceremony Inc. awards & presentation of the 14th fib PhD symposium in Italy (Webinar Room A) - J.M. Torrenti  
Online user: 1