› Case study of carbonation of 100 years old concrete covered by a thin cement render - Jakub Gašpárek, Slovak University of Technology, Faculty of Civil Engineering, Department of Concrete Structures and Bridges, Radlinského 11, 81005 Bratislava
09:30-10:00 (30min)
› Comparison of normative test methods for evaluating concrete resistance to freeze-thaw cycles to real exposure conditions. - Sara AL HAJ SLEIMAN, Research Institute of Civil and Mechanical Engineering GeM, UMR-CNRS 6183 – Ecole Centrale de Nantes, 1 Rue de la Noë, 44300 Nantes, France, Association Technique de l'Industrie des Liants Hydrauliques
10:00-10:30 (30min)
› Experimental study of the concrete creep potential that is already damaged by Alkali Aggregates Reactions (AAR) in a new finite elements approach - Clement LACOMBE, Laboratoire Matériaux et Durabilité des constructions
10:30-11:00 (30min)
› Internal hydrophobization of cement-based materials - Kalina Grabowska, Department of Building Materials Physics and Sustainable Design, Lodz University of Technology
11:00-11:30 (30min)
› Numerical Simulation of Asphalt Pavement Countermeasure at High Temperature Against Protrusion of Vertical PC Bars Using Applied Element Method - Addisu Desalegne Bonger, Yokohama National University
11:30-12:00 (30min)
› Cyclic Shear Response of Reinforced Concrete Dapped-End Beams (RCDEBs) Under Bond Deterioration - Ajibola Ibrahim Quadri, Graduate school of urban innovation, Yokohama National University
09:30-10:00 (30min)
› Damage indication by electrical resistivity measurement of carbon short fibre reinforced concrete in fatigue testing -
10:00-10:30 (30min)
› Influence of silica fume on the deterioration under compressive fatigue loading in high-strength concrete - Tim Scheiden, Institute of Building Materials Science, Leibniz University Hannover
10:30-11:00 (30min)
› Influence of temperature increase on fatigue behaviour of concrete during compressive fatigue loading - Martin Markert, Materials Testing Institute University of Stuttgart
11:00-11:30 (30min)
› Influence of the concrete production and specimen preparation techniques on the compressive strength and fatigue resistance of HPC - Marco Basaldella, Institute for Building Materials Science, Gottfried Wilhelm Leibniz Universität Hannover
11:30-12:00 (30min)
› Behaviour of glass fiber reinforced gypsum panels as walls and slabs : a review - AISHWARYA SHAJI, Indian Institute of Technology Madras
14:00-14:30 (30min)
› Identification of mechanical fracture parameters of fine-grained brittle matrix composites - Martin Lipowczan, Brno University of Technology, Faculty of Civil Engineering
14:30-15:00 (30min)
› Plastic hinge relocation on the beams with innovative beam-to-column joints - Haider Hamad Ghayeb, Department of Civil Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
15:00-15:30 (30min)
› The influence of cyclic freezing – thawing on the effectiveness of anchoring FRP reinforcement - Rafal Wasilczyk, Białystok University of Technology
15:30-16:00 (30min)
› The experimental verification of concrete elements strengthened using UHPC - Lukáš Boháček, Czech Technical University in Prague
16:00-16:30 (30min)
› Assessment of Existing Masonry Structures (The ARES project) - Ivan Hafner, Faculty of Civil Engineering University of Zagreb
14:00-14:30 (30min)
› Stop Criteria for Proof Load Testing of Reinforced Concrete Structures - Gabriela I. Zarate Garnica, Concrete Structures, Delft University of Technology, Delft, the Netherlands
14:30-15:00 (30min)
› Wave-based Indicators of Shear Failure in Reinforced Concrete Members without Shear Reinforcement: A Review - Fengqiao Zhang, Delft University of Technology
15:00-15:30 (30min)
› Seismic assessment of a RC frame building designed for gravity loads including joint deformation capacity model - Marcello Sabene, University Niccolò Cusano
15:30-16:00 (30min)
Loading... 
Webinar Room A
